P0687 - ECM/Pcm Power Relay Control Circuit High
P0687 - ECM/PCM POWER RELAY CONTROL CIRCUIT HIGH
| Description: This DTC sets when the ignition switch position run (ISP-R) circuit indicates the ignition is in the OFF, ACC, or LOCK position, and the amount of time the PCM remains powered through the PCM power relay exceeds a predetermined amount of time. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Ability to communicate with the PCM when the ignition is in the OFF, ACC, or LOCK position indicates a hard fault. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST B: POWERTRAIN CONTROL MODULE (PCM) POWER RELAY . | ||