Module Network Input Messages - DDM and PDM
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Outer mirror defrost command | BCM | Based on the defrost request message from the HVAC module, the BCM uses this message to command the heated mirrors on or off. |
| Broadcast Message | Originating Module | Message Purpose |
|---|---|---|
| Mirror Position Store Request | DSM | Used to command the DDM and PDM to save the current mirror position to a specific memory preset. |
| Mirror Position Load Request | DSM | Used to command the DDM and PDM to recall a specific memory preset mirror position. |