Component Description

The selector lever cable transfers the transmission operating mode from the selector lever to the automatic transmission. The indicated position of the selector lever is transferred to the transmission through the steering column mounted selector lever, or the floor-mounted selector lever, to the selector lever cable and down to the manual control lever on the transmission.

Brake Shift Interlock Actuator 

The brake shift interlock system consists of:

• BSIA that is integral to the selector lever assembly.
• ignition switch.
• BPP switch.
• BCM-B.

Selector Lever Cable 

The selector lever cable consists of:

• a cable that connects the transaxle manual control lever to the selector lever assembly.
• a cable grommet that is fastened to the floor pan.
• adjuster locking tab at the transaxle manual control lever.

Selector Lever 

The selector lever consists of:

• Selector lever knob
• BSIA that is integral to the selector lever assembly.
• TCS that is integral to the selector lever knob.

SelectShift™ Switch 

The SelectShift™ switch is a toggle switch intregal to the selector lever knob. If a new switch is required install a new selector lever knob.