October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Compressor Driver Module
- 1.
Remove the rear floor console refrigerator. Refer to Refrigerator .
- 2.
NOTE:
Do not bend the condenser tubes. The screwdriver must fit between the condenser tubes or damage may occur to the refrigerator.
Using a long thin screwdriver, remove the philips screw from the compressor driver module mounting bracket.
 Courtesy of FORD MOTOR COMPANY
|
- 3.
Disconnect the upper electrical connector from the compressor driver module.
 Courtesy of FORD MOTOR COMPANY
|
- 4.
Rotate the compressor driver module to the right and remove from the mounting bracket.
 Courtesy of FORD MOTOR COMPANY
|
- 5.
Disconnect the lower electrical connector from the compressor driver module.
 Courtesy of FORD MOTOR COMPANY
|
- 6.
Disconnect the compressor driver module-to-refrigerator electrical connector.
 Courtesy of FORD MOTOR COMPANY
|
- 7.
To install, reverse the removal procedure.