LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2015 >> Taurus SHO >> Repair and Diagnosis >> General Information >> DTC Index >> Information System And Entertainment System (4.2 Inch Display) DTCS >> Front Controls Interface Module (FCIM)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Front Controls Interface Module (FCIM)

DTC INDEX

DTC Description Action
B00D5:01 Restraint System Passenger Disable Indicator: General Electrical Failure CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B00D5:01 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to Front Controls Interface Module (FCIM) .
B113C:11 Hazard Switch Illumination: Circuit Short To Ground CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B113C:11 is still present, INSTALL a new Front Controls Interface Module (FCIM). REFER to Front Controls Interface Module (FCIM) .
B1202:01 Restraint System Passenger Enable Indicator: General Electrical Failure CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC B1202:01 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) .
U0155:00 Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information GO to Pinpoint Test Z .
U0257:00 Lost Communication With Front Controls/Display Interface Module: No Sub Type Information GO to Pinpoint Test AE .
U0423:00 Invalid Data Received From Instrument Panel Cluster Control Module: No Sub Type Information REFER to Instrumentation, Message Center, and Warnings to retrieve and follow DTCs present in the IPC.
U2013:63 Switch Pack: Circuit/Component Protection Time-Out GO to Pinpoint Test G .
U3000:41 Control Module: General Checksum Failure CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC U3000:41 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) .
U3000:42 Control Module: General Memory Failure CLEAR the DTCs. WAIT 10 seconds. REPEAT the self-test. If DTC U3000:42 is still present, INSTALL a new FCIM. REFER to Front Controls Interface Module (FCIM) .
U3003:16 Battery Voltage: Circuit Voltage Below Threshold GO to Pinpoint Test AF .
U3003:17 Battery Voltage: Circuit Voltage Above Threshold GO to Pinpoint Test AG .