Wiper System And Washer System DTCS
DTC INDEX
| DTC | Description | Action |
|---|---|---|
| B1087:86 | LIN Bus "A": Signal Invalid | If the exterior lamps are on, REFER to: Headlamps If the exterior lamps are not on, GO to Pinpoint Test B |
| B1095:12 | Wiper On/Off Relay Circuit Short To Battery | GO to Pinpoint Test A |
| B1095:14 | Wiper On/Off Relay Circuit Short To Ground or Open | If the windshield wipers are inoperative, GO to Pinpoint Test A If the windshield wipers are continuously on, GO to Pinpoint Test E |
| B1096:12 | Wiper High/Low Relay: Circuit Short To Battery | GO to Pinpoint Test D |
| B1096:14 | Wiper High/Low Relay: Circuit Short To Ground or Open | If the low speed windshield wiper setting is inoperative, GO to Pinpoint Test C If the high speed windshield wiper setting is inoperative, GO to Pinpoint Test D |
| B10AD:49 | Rain Sensor: Internal Electronic Failure | INSTALL a new rain sensor. REFER to: Rain Sensor |
| B10AD:83 | Rain Sensor: Value of Signal Protection Calculation Incorrect | GO to Pinpoint Test G |
| B10AD:87 | Rain Sensor: Missing Message | GO to Pinpoint Test G |
| B112B:07 | Steering Wheel Module: Mechanical Failure | INSTALL a new wiper/washer switch. REFER to: Steering Column Multifunction Switch RH Test the system for normal operation. If the concern is still present, INSTAL a new SASM. REFER to: Steering Angle Sensor Module (SASM) |
| B112B:83 | Steering Wheel Module: Value of Signal Protection Calculation Incorrect | GO to Pinpoint Test B |
| B112B:87 | Steering Wheel Module: Missing Message | GO to Pinpoint Test B |
| B129A:86 | LIN Bus "D": Signal Invalid | GO to Pinpoint Test G |
| B129A:88 | LIN Bus "D": Bus Off | GO to Pinpoint Test G |
| B1C45:29 | Front Wiper Park Position Switch: Signal Invalid | GO to Pinpoint Test H |
| All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Body Control Module (BCM) |