Pinpoint Test A : The Adjustable Steering Column Is Inoperative In One Or More Directions Using The Steering Column Control Switch: Notes

Refer to Adjustable Steering Column for schematic and connector information.

Normal Operation and Fault Conditions 

The SCCM receives input directly from the steering column control switch then sends a message along the HS-CAN2 to the GWM indicating the desired steering column movement. The GWM sends the message to the DSM along the MS-CAN which activates the tilt and telescopic (reach) motors depending on the message received.

A failure of the steering column control switch, circuits, motor or module cause the power adjustable column to become inoperative and a DTC may be set in the SCCM and the DSM.

Possible Sources 

• Wiring, terminals or connectors
• Adjustable steering column tilt motor
• Adjustable steering column telescopic motor
• DSM
• SCCM
• GWM