October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Anti-Lock Brake System (ABS) Module: Removal

NOTE: Removal steps in this procedure may contain installation details.

1.

Remove the HCU. Refer to: Hydraulic Control Unit (HCU) .

2.

NOTE: Make sure the HCU and ABS module are clean and free of brake fluid or foreign material before separating the components. Do not allow any brake fluid or foreign material to enter the mating side of the ABS module or component damage can occur.

Remove the bolts and the ABS module.

Torque: 49 lb.in (5.5 Nm)

GFD121572

Courtesy of FORD MOTOR COMPANY