LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2016 >> Focus RS >> Repair and Diagnosis (Single Page) >> Transmission >> Transmission Control Systems >> Four-Wheel Drive Systems (Except Electric Vehicle) >> Description And Operation >> Four-Wheel Drive Systems - System Operation and Component Description >> System Operation >> Automatic Torque Coupling Configuration
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Torque Coupling Configuration

NOTE: If programming information is not correct, Rear Drive Unit (RDU) damage or driveability concerns can occur.
NOTE: The 20-digit alpha numeric information is pin stamped on the Rear Drive Unit (RDU).

1. Using a diagnostic scan tool, perform the Automatic Torque Coupling Barcode Entry procedure. This procedure is located within Powertrain, under the toolbox icon. Follow the instructions displayed on the diagnostic scan tool.

NOTE: If the AWD module was not replaced, the barcode information is already populated. If the information is different it must be changed to match the information pin stamped on the Rear Drive Unit (RDU).
NOTE: The diagnostic scan tool verifies the digits entered are valid and displays a message if the information is not valid.

2. Verify and if necessary, change the information in the scan tool to match the information pin stamped on the Rear Drive Unit (RDU).

scientia non olet · About LEMON Manuals