April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (PCM): Installation

1.

To install, reverse the removal procedure.

2.

NOTE: This step is only necessary when installing a new component.

Upload the module information from the diagnostic tool using the Programmable Modules Installation routine.

Use the General Equipment: Ford Diagnostic Equipment

3.

NOTE: The step is only necessary when installing a new component.
- Carry out the Parameter Reset procedure.
- Vehicles without keyless entry and push button start. REFER to: PASSIVE ANTI-THEFT SYSTEM (PATS) - VEHICLES WITH: PUSH BUTTON START (EXCEPT HYBRID) .
- Vehicles with keyless entry and push button start. REFER to: PASSIVE ANTI-THEFT SYSTEM (PATS) (EXCEPT HYBRID) .

4.

Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.