October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Cylinder Head Temperature (CHT) Sensor - 3.5L GTDI

NOTE: For information on Ford Color Coded Illustrations refer to COLOR-CODING - FORD .

Fig 1: Cylinder Head Temperature Sensor With Torque Specifications

GFD83441

Courtesy of FORD MOTOR COMPANY

Item	Part Number	Description
1	14A464	Cylinder Head Temperature(CHT) sensor electrical connector
2	6G004	CHT sensor
3	W503274	Ground wire-to-engine front cover bolt

1.

Remove the Air Cleaner(ACL) outlet pipe and the ACL. For additional information, refer to Intake Air Distribution and Filtering .

2.

Position the ACL -to-RH turbocharger intake tube aside. For additional information, refer to Intake Air Distribution and Filtering .

3.

Remove the ground wire-to-engine front cover bolt.

4.

Disconnect the Cylinder Head Temperature(CHT) sensor electrical connector.

5.

Remove and discard the CHT sensor.
- To install, tighten to 10 Nm (89 lb-in).

6.

To install, reverse the removal procedure.
- Do not reuse the CHT sensor. Install a new sensor.