Factory Keycode Retrieval

The factory keycode for the keyless entry keypad can be retrieved from a label on the BCM, a wallet card in the Owner's Literature, using a diagnostic scan tool, or by using 2 programmed keys.

To retrieve the factory keycode using 2 programmed keys, carry out the following steps within 10 seconds:

• Place the first programmed key in the backup starting location and turn the ignition on.
• Turn the ignition off and remove the first programmed key.
• Place the second programmed key in the backup starting location and turn the ignition on.

The factory keycode displays momentarily in the message center.