Fuel Level Sensor: Installation

All Vehicles 

• 1.
  
  
  NOTE: Make sure to install a new fuel level sensor O-ring seal.

  To install, reverse the removal procedure.

  • Make sure the alignment arrows on the fuel level sensor and the fuel tank meet before tightening the fuel level sensor lock ring.
  • Tighten the fuel level sensor lock ring until it meets the stop tabs on the fuel tank.

Courtesy of FORD MOTOR COMPANY

Vehicles equipped with Police Package 

• 2.
  
  Hand tighten only.

Courtesy of FORD MOTOR COMPANY

• 3.
  
  Tighten to 55Nm (41 lb-ft).

Courtesy of FORD MOTOR COMPANY

All Vehicles 

• 4.
  
  Install the rear seat lower cushion. For additional information, refer to Seating .

• 5.
  
  Connect the battery ground cable. For additional information, refer to Battery, Mounting and Cables .