LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2018 >> Focus ST >> Repair and Diagnosis >> External Pages >> Different car >> Section 131 (Exterior Lighting System) >> Removal And Installation >> Stoplamp Switch >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Stoplamp Switch: Installation

WARNING: This page is about a different car, the 2017 Lincoln Navigator and 2017 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: It is very important to not press, pull or touch the brake pedal assembly during the installation of the stoplamp switch. Failure to follow these instructions may damage the stoplamp switch.

  1. 1.

    Without movement to the brake pedal assembly, install the stoplamp switch and rotate 45 degrees counterclockwise.

  1. 2.

    Connect the stoplamp switch electrical connector.
scientia non olet · About LEMON Manuals