Memory Mirror Positioning

When a memory recall or save is initiated, the DSM sends a message to the DDM and PDM through the MS-CAN. Based on this message, the DDM and PDM recall the requested memory preset mirror position or save the current mirror position to the requested preset. During a memory recall, the DDM and PDM supply voltage and ground to the appropriate exterior mirror motors to achieve the desired memory positions based on feedback from the mirror motor potentiometers. If the exterior mirror control switch is activated in any direction during a memory recall, the recall is aborted and the selected exterior mirror responds to the switch inputs.

The LH exterior mirror glass position memory presets are stored in the DDM and the RH exterior mirror glass position memory presets are stored in the PDM.

A memory recall or memory save can be initiated by the memory set switch, RKE transmitter or Intelligent Access (IA) key (if equipped) or the keyless entry keypad. For additional information on memory recall or memory save, refer to the Owner's Literature.

For additional information on the memory feature, Refer to: FRONT SEATS .