LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2019 >> Flex SE >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules >> Diagnosis And Testing >> Body Control Module (BCM) >> Pinpoint Tests >> Pinpoint Test I : DTC P0230:12, P230:14 >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test I : DTC P0230:12, P230:14: Notes

Diagnostic Overview 

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods for information about these practices.

Normal Operation and Fault Conditions 

The BCM provides a ground to the coil side of the BJB fuel pump relay.

DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
P0230:12 Fuel Pump Primary Circuit: Circuit Short To Battery A continuous and on-demand DTC that sets when the BCM detects a short to voltage in the fuel pump relay coil circuit.
P0230:14 Fuel Pump Primary Circuit: Circuit Short To Ground or Open A continuous and on-demand DTC that sets when the BCM detects a short to ground or open in the fuel pump relay coil circuit.

Possible Sources 

Visual Inspection and Diagnostic Pre-Checks 

Inspect BJB fuel pump relay fuse. Refer to Wiring Diagrams for schematic and connector information.