| U2100:00 |
Initial Configuration Not Complete: No Sub Type Information |
CHECK the vehicle service history for recent service actions related to this module. This DTC sets due to incomplete or incorrect PMI procedures. INSTALL As-Built data from Professional Technician Society (PTS) following diagnostic scan tool instructions under Module Programming>As-Built. |
| U3000:44 |
Control Module: Data Memory Failure |
GO to Pinpoint Test AL |
| U3000:45 |
Control Module: Program Memory Failure |
GO to Pinpoint Test AL |
| U3000:46 |
Control Module: Calibration / Parameter Memory Failure |
GO to Pinpoint Test AL |
| U3000:47 |
Control Module: Watchdog / Safety μC Failure |
GO to Pinpoint Test AL |
| U3000:49 |
Control Module: Internal Electronic Failure |
GO to Pinpoint Test AL |