LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2020 >> Transit Connect Titanium, Gas >> Repair and Diagnosis >> Brakes >> Brakes Control Systems >> Abs Guided Routine >> Pinpoint Tests >> Pinpoint Tests Z: Module Configuration Concern >> Normal Operation and Fault Conditions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Normal Operation and Fault Conditions

During new module installation, configuration files are loaded into the new module being replaced. If a discrepancy is detected between the modules or an incomplete programming procedure is carried out, a DTC sets. 

PPT Z ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0300:51 Internal Control Module Software Invompatibility: Not Programmed Sets due to incomplete or improper module programming procedures.
U2017:57 Control Module Software #2: Invalid/Incompatible Software Component Sets due to incomplete or improper module programming procedures.
U2017:93 Control Module Software #2: No Operation Sets due to incomplete or improper module programming procedures.
U2024:51 Control Module Cal-Config Data: Not Programmed This DTC is only present when a new ABS module is installed, the ABS module is flashed or the ABS module is reconfigured.
U2200:00 Control Module Configuration Memory Corrupt: No Sub Type Information Sets due to incomplete or improper module programming procedures.
scientia non olet · About LEMON Manuals