P0604 - Internal Control Module Random Access Memory (Ram) Error
DTC DESCRIPTION P0604 - INTERNAL CONTROL MODULE RANDOM ACCESS MEMORY (RAM) ERROR
| Description: | This DTC sets when the PCM RAM has been corrupted. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Check for aftermarket performance products. If it is necessary to install a new PCM, refer to Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Programming the VID Block for a Replacement PCM. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test QA. | ||