Pinpoint Test C: DTC (Diagnostic Trouble Code) B10D7:05
- Normal Operation and Fault Conditions
REFER to: Passive Anti-Theft System (PATS) .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B10D7:05 PATS Key: System Programming Failure Sets when a failure occurs during the key programming procedure. Possible Causes
- Keys not programmed
- Passive key
- C1 CHECK BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, carry out the BCM self-test.
Are there any other Diagnostic Trouble Codes (DTCs) Present '
Yes DIAGNOSE all other Diagnostic Trouble codes (DTCs) first. Refer to: Diagnostic Trouble Code (DTC) Chart No GO to C2 - C2 PROGRAM SUSPECT PASSIVE KEY
- Program the suspect passive key again. REFER to: Passive Anti-Theft System (PATS) .
Is the passive key programmed successfully?
Yes The system is operating correctly at this time. The passive key was not programmed correctly. No If key programming fails, REPLACE the suspect passive key. PROGRAM the new passive key. REFER to: Passive Anti-Theft System (PATS) .