Pinpoint Test D: DTC (Diagnostic Trouble Code) B10D7:55
- Normal Operation and Fault Conditions
REFER to: Passive Anti-Theft System (PATS) .
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition BCM B10D7:55 PATS Key: Not Configured Sets when the CEI was not completed during the PMI procedure. Possible Causes
- CEI was not completed during the PMI procedure.
- D1 CHECK BCM (BODY CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, carry out the BCM self-test.
Are there any other Diagnostic Trouble Codes (DTCs) Present?
.Yes DIAGNOSE all other Diagnostic Trouble codes (DTCs) first. Refer to: Diagnostic Trouble Code (DTC) Chart No The Configurable Engine Immobilizer (CEI) was not completed during the PMI. Using the diagnostic scan tool, CARRY OUT the Configurable Engine Immobilizer (CEI) as part of the PMI following on-screen instructions.