Noise in Steering Column
- Coupling pulled apart, or bolts not tightened.
- Column not correctly aligned.
- Broken lower joint.
- Horn contact ring not lubricated.
- Lack of grease on bearings or bearing surface.
- Lower or upper shaft bearing worn or broken.
- Shaft lock snap ring not properly seated.
- Plastic spherical joint not lubricated.
- Shroud or housing loose.
- Lock plate retaining ring not seated.
- Loose sight shield.
- Loose cover.
- Coupling bottoming.
- Sheared input shaft plastic joint.
- Improper gear meshload.