LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1990 >> Forward Control 4.3 Z, Automatic, 475/M40 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System (Gasoline) >> Throttle Body >> Reassembly Fuel Meter Assembly (Model 700)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reassembly Fuel Meter Assembly (Model 700)

  1. Install new fuel meter-to-throttle body assembly gasket. Match cutout portions of gasket with openings in throttle body assembly.
  2. Place fuel meter assembly on throttle body. Install fuel meter-to-throttle body retaining screws and washers (screws should be coated with locking compound). Tighten screws to specification. See TORQUE SPECIFICATIONS  at end of article.
  3. Install new "O" rings on fuel lines. Using a back-up wrench on fuel fittings, tighten fuel line nuts to 20 ft. lbs. (27 N.m). To complete reassembly, reverse disassembly procedure.
scientia non olet · About LEMON Manuals