LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1990 >> Forward Control 6.2 J, Automatic, 400/M40 >> Repair and Diagnosis >> Engine Performance >> Application >> Engine/VIN Id >> Engine Code Location
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Engine Code Location

The locations of the stamped codes for each particular engine are listed below. Refer to 1990-91 MODEL COVERAGE & IDENTIFICATION .

ENGINE CODE LOCATION

Engine Code Location(s)
LU2, LB4, LO3, LO5 & L19 On front of engine block, on right side above timing gear cover OR on left side of engine block, on engine-to-transmission mating flange.
LN8 & L38 On left side of engine block, at rear below cylinder head OR on left side of engine block, on engine-to-transmission mating flange.
LL2 On front of engine block, on left side above timing gear cover OR on right side of engine block above engine mount.
LH6 & LL4 On front of engine block, right side of timing gear housing casting OR on top of engine block, near left cylinder head-to-engine block mating surface, at front OR on left side of engine block, on engine-to-transmission mating flange.
LG6 On left side of engine block, on engine-to-transmission mating flange.
(1) See ENGINE in BODY, ENGINE, FUEL SYSTEM & IGNITION SYSTEM APPLICATIONS  table for engine code location prefix.