LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1992 >> Forward Control 5.7 K, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Controls - Remove/Install/Overhaul - 5.2L Gasoline) >> Ignition System >> Camshaft Position Sensor >> Removal & Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal & Installation

WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove distributor cap. Disconnect camshaft position sensor connector from harness connector. Remove distributor rotor. Lift and remove sensor from distributor. To install, reverse removal procedure.