LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1992 >> Forward Control 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Controls - Remove/Install/Overhaul - 5.2L Gasoline) >> Ignition System >> Distributor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition System: Distributor: Installation

WARNING: This page is about a different car, the 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position distributor in engine. Ensure "O" ring is properly seated on distributor. Replace "O" ring if it is cracked or nicked. Carefully engage distributor drive with camshaft drive so that when distributor is installed properly, rotor aligns with reference mark on intake plenum.
  2. Install distributor cap. Check all high tension wires for good connections. Install hold-down nut. Connect distributor lead wire at wiring harness connector.
scientia non olet · About LEMON Manuals