Chatter Test
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1996 GMC Yukon, 1996 GMC Vandura Special, 1996 GMC Vandura, 1996 GMC Suburban, and 1996 GMC Savana Special. However, it is still accessible from the selected car via links, so may be relevant.
Chatter for new and used injector nozzles may vary. With some used injector nozzles, chatter is difficult to detect during slow actuation of tester lever. Some injector nozzles may chatter louder than others. As long as there is chatter, injector nozzle is acceptable.
- Close tester shutoff lever at pressure gauge. Slowly depress lever and note whether chatter is heard. If no chatter is heard, increase speed of lever movement until it reaches a point at which injector nozzle chatters.
- At fast lever movement, injector nozzle may emit a "hissing" or "squealing" sound rather than normal chatter. This is acceptable. These sounds indicate that injector nozzle needle moves freely and injector nozzle seat, guide and pintle have no mechanical defects. Replace any injector nozzle assembly that does not chatter.