Opening Pressure Test
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1996 GMC Yukon, 1996 GMC Vandura Special, 1996 GMC Vandura, 1996 GMC Suburban, and 1996 GMC Savana Special. However, it is still accessible from the selected car via links, so may be relevant.
- Open tester shutoff valve 1/4 turn from closed position. Slowly depress tester lever and observe gauge. Note pressure at which needle of pressure gauge stops. Some injector nozzles may pop while other injector nozzles may drip (this is not a leak).
- Injector opening pressure should not fall to less than 1500 psi (105 kg/cm2 ). Replace any injector nozzle that does not meet lowest acceptable pressure. Release tester pressure.