Section 12 (Engine Controls - Specifications - 8.0L): Capacities

WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

BATTERY SPECIFICATIONS

Load Test (Amps)

⁽¹⁾ CC Rating @ 0°F (Amps)

⁽²⁾ Reserve Capacity Rating (Min.)

200

500

110

250-300

600

120

315

685

125

375

750

125

405

810

133

⁽¹⁾	Cold Cranking (CC) rating is current a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2 volts or greater at specified temperature.

⁽²⁾	Reserve capacity rating is length of time a battery can deliver 25 amps and maintain a minimum terminal voltage of 10.5 volts at 80°F (27°C).

FLUID CAPACITIES

Application

Specification

Automatic Transmission ⁽¹⁾

Estimated Service Refill

N/A

Overhaul Refill (Includes Torque Converter) ⁽¹⁾

⁽²⁾ 8.7-16.5 Qts. (8.2-15.6L)

Cooling System (Includes Recovery Tank)

24.0 Qts. (22.7L)

Crankcase (Includes Filter)

7.0 Qts. (6.6L)

Front Axle

Dana 44

5.6 Pts. (2.6L)

Dana 60

6.3 Pts. (3.0L)

Manual Transmission (NV4500 HD)

⁽⁴⁾ 4.0 Qts. (3.8L)

Power Steering Fluid ⁽⁵⁾

2.7 Pts. (1.3L)

Power Takeoff (PTO) Adapter (NV021)

4.6 Pts. (2.2L)

Rear Axle ⁽⁶⁾⁽³⁾

8 1/4"

4.4 Pts. (2.1L)

9 1/4"

4.8 Pts. (2.3L)

Dana 60 (2WD)

6.3 Pts. (3.0L)

Dana 60 (4WD)

7.3 Pts. (3.4L)

Dana 70 (2WD)

7.0 Pts. (3.3L)

Dana 70 (4WD)

7.8 Pts. (3.6L)

Dana 80 (2WD)

6.8 Pts. (3.3L)

Dana 80 (4WD)

10.1 Pts. (4.8L)

Transfer Case ⁽¹⁾

NV231

2.5 Pts. (1.2L)

NV241 HD

6.5 Pts. (3.1L)

⁽¹⁾	Mopar ATF Plus type 7176 recommended, if not available use Mopar Dexron II ATF.

⁽²⁾	Approximate refill capacity.

⁽³⁾	Use Mopar Thermal stable Multi-Purpose Gear Lubricant SAE 80W-90 with API GL-5 specification.

⁽⁴⁾	Use Mopar manual transmission fluid P/N 4637579 or Castrol Syntog; synthetic fluids with SAE 75W-90 API GL-4 rating.

⁽⁵⁾	Use only Mopar power steering fluid or equivalent. DO NOT use Automatic Transmission Fluid (ATF).

⁽⁶⁾	Use SAE 80W-90 with MIL-L-2105C and API GL-5 specification. Add one container of friction modifier to Trac-Lok or Power-Lok limited slip differential when gear lubricant is changed.