LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1997 >> Forward Control 6.5 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Controls - System/Component Tests - 2.2L) >> Miscellaneous ECM/Pcm/VCM Controls >> Transmission (C-8) >> Converter Lock-Up Signal From ECM/PCM/VCM
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Converter Lock-Up Signal From ECM/PCM/VCM

WARNING: This page is about a different car, the 1995 GMC Sonoma and 1995 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warm engine to operating temperature. Raise vehicle and support drive wheels. Support suspension where necessary to prevent damage to drive axles.
  2. Connect a test light to battery voltage. Touch TCC control driver terminal with test light. See Figure . Accelerate vehicle to 45 MPH and note test light. If test light does not illuminate, problem is a faulty ECM/PCM/VCM connector or ECM/PCM/VCM. On some models, lock-up signal may be checked at Data Link Connector (DLC) terminal "F" instead of at ECM/PCM/VCM terminal.
scientia non olet · About LEMON Manuals