Ground Circuits
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 1996 GMC Yukon, 1996 GMC Vandura Special, 1996 GMC Vandura, 1996 GMC Suburban, and 1996 GMC Savana Special. However, it is still accessible from the selected car via links, so may be relevant.
- Using an ohmmeter, check for continuity to ground on ECM/PCM/VCM ground terminals. Resistance should be zero ohms. If not, repair open to ground.
- Using a DVOM, touch negative lead of voltmeter to a good ground. Touch positive lead of voltmeter to each ground terminal. With vehicle running, voltmeter should indicate less than one volt. If voltmeter reading is greater than one volt, check for open, corrosion or loose connection on ground circuit.