Code 73, Pressure Control Solenoid (Current Error): Notes

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 1995 GMC Vandura Special, 1995 GMC Vandura, 1995 GMC Suburban, 1995 GMC Rally Camper Special, and 1995 GMC Rally. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: This flow chart requires the use of a bidirectional (Tech 1) scan tester.

Pressure control solenoid is controlled by control module to regulate transmission line pressure. Control module looks at TPS voltage, engine RPM and other inputs to determine appropriate line pressure for a given load, then regulates pressure by applying a varying amperage. Applied amperage can vary from 1 to 1.1 amps. Control module then monitors amperage at return line.

NOTE: Test numbers refer to numbers on diagnostic chart.

Checks ability of control module to command solenoid.
Checks internal transmission harness and solenoid for incorrect resistance.