LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1998 >> Forward Control 6.5 F >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul - 6.5L Turbo Diesel >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Powertrain Control Module (Pcm): Removal

Ensure ignition switch is in OFF position. Disconnect negative battery cable. Unplug harness connectors from PCM. Remove PCM from vehicle. Remove access cover and remove knock sensor module from PCM.

NOTE: After installation of a NEW PCM, Malfunction Indicator Light (MIL) will remain on until PCM is programmed.