LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 1999 >> Envoy >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Remote Keyless Entry Systems >> Programming Procedures >> Transmitter Programming >> Without Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Without Scan Tool

  1. Ensure driver's door is closed. With ignition switch in OFF position, hold down power unlock button on door panel. Turn ignition switch to ON position, then OFF. Turn ignition switch to ON position, then OFF a second time. Release power unlock button on door panel. Receiver control module will respond by locking and then unlocking all doors and unlatching rear window (utility vehicles only) to indicate programming mode.
  2. Hold down LOCK and UNLOCK buttons on transmitter until receiver control module responds by locking then unlocking all doors and unlatching rear window (utility vehicles only).
  3. Repeat step 2) for each additional transmitter. All extra transmitters MUST be programmed at this time. When a new transmitter is programmed, old transmitters will be deactivated.
  4. Turn ignition switch to ON position to exit programming mode.
scientia non olet · About LEMON Manuals