Luxury Keyless Entry System

Have each of the transmitters that you intend to program ready. This vehicle will allow you to program a maximum of four transmitters at one time.

When reprogramming the remote control door lock receiver, all transmitters must be programmed at this time for the transmitters to operate this vehicle. Transmitters not programmed at this time will not work, and the procedure will have to be redone with all the transmitters.

1. Turn the ignition to the RUN position, then back to the OFF position. This will disarm the theft-deterrent system.
2. Remove the RADIO fuse 17.
3. Turn the ignition from the OFF position to the RUN position three times quickly, within five seconds. The vehicle will respond by locking the doors, unlocking the driver's door and releasing the tailgate or cargo doors. The transmitter is now ready to match to the vehicle.
4. Press and hold the LOCK and UNLOCK buttons on the first transmitter for 15 seconds. The vehicle will respond as in step 3)  .
5. Repeat step  4 for the remaining transmitters.
6. Replace the RADIO Fuse.
7. Check that all transmitters work by pressing their buttons.