LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2000 >> C3500 HD 7.4 J, Automatic >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Pump Balance Module - Dual Tank >> Removal & Installation >> Fuel Pump Balance Module >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel Pump Balance Module: Installation

  1. Remove caps from the fuel pipes.
  2. Install new pipe O-rings.
  3. Position the new pump in the pump bracket.
  4. Connect fuel feed pipe and suction pipe to the fuel pump. Use a backup wrench to prevent the pump from turning. Tighten the fittings to 22 ft. lbs. (30 N.m).
  5. Connect electrical connector.
  6. Lower vehicle.
  7. Tighten fuel filler cap.
  8. Connect negative battery cable.
  9. Turn ON ignition for 2 seconds. Turn OFF ignition for 10 seconds. Turn ON ignition. Inspect for fuel leaks.
scientia non olet · About LEMON Manuals