LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Automatic, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 581 (Rear Suspension System) >> Rear Stabilizer >> Rear Stabilizer Removal/Installation >> Stabilizer Bushing Installation Note
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Stabilizer Bushing Installation Note

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the stabilizer bushing so that the projection is facing toward the left side of the vehicle.
    Fig 1: Installing Stabilizer Bushings
    G00376681Courtesy of MAZDA MOTORS CORP.
  2. Widen the stabilizer bushing opening 16-26 mm {0.7-1.0 in} and install the bushing to the rear stabilizer as shown in the illustration.
    Fig 2: Stabilizer Bushing Installation
    G00376682Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals