LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Automatic, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission Servicing) >> Removal & Installation >> Control & Shift Solenoids >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Control & Shift Solenoids: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the 3-2 control solenoid. Install the 3-2 control solenoid retainer. Install the 1-2 and 2-3 shift solenoids. See Fig 3.
  2. Install the 1-2 and 2-3 shift solenoid retainers. Install the pressure control solenoid. Ensure the electrical tabs are facing outboard. See Fig 3.
  3. Install the pressure control solenoid retainer and retaining bolt. Tighten the pressure control solenoid retaining bolt to specification. See TORQUE SPECIFICATIONS .
  4. Connect the internal wiring harness electrical connectors to the following components:
    • Transmission fluid pressure switch (1). See Fig 1.
    • 1-2 shift control solenoid (2).
    • 2-3 shift control solenoid (3).
    • Pressure control solenoid (4) TCC PWM solenoid (5).
    • 3-2 control solenoid (6).
  5. Install the 1-2 accumulator. See ACCUMULATOR ASSEMBLY .
  6. Install the transmission oil pan and filter. See DRAINING & REFILLING  under LUBRICATION.
  7. Fill transmission with appropriate fluid to proper level. See LUBRICATION .
Fig 1: View Of Control & Shift Solenoid Locations
G99A03602Courtesy of GENERAL MOTORS CORP.
Fig 2: Disassembled View Of Pressure Control Solenoid
G00056998Courtesy of GENERAL MOTORS CORP.
Fig 3: Disassembled View Of Shift Solenoids
G00056999Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals