LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Engine Controls - System & Component Testing) >> Fuel System (Gasoline) >> Fuel Injector Balance Test With Tech 2 (3.4L) >> Test Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Description

WARNING: This page does not describe the selected car, but rather 31 other vehicles, including the 2002 Saturn Vue, 2002 Pontiac Montana, 2002 Pontiac Aztek, 2002 Oldsmobile Silhouette, and 2002 Oldsmobile Bravada. However, it is still accessible from the selected car via links, so may be relevant.

The numbers below refer to step numbers in diagnostic procedure.

  1. 3

    Engine Coolant Temperature (ECT) must be below operating temperature in order to avoid irregular fuel pressure readings due to hot soak fuel boiling.
  2. 4

    Fuel pressure should be within specified range. If fuel pressure is not within specified range, see FUEL SYSTEM PRESSURE TEST (3.4L) under BASIC FUEL SYSTEM CHECKS (GASOLINE) in BASIC DIAGNOSTIC PROCEDURES - TRUCKS - EXCEPT TRACKER article.
  3. 5

    Fuel pressure should reach a steady value. If fuel pressure does not stabilize, see FUEL SYSTEM PRESSURE TEST (3.4L) under BASIC FUEL SYSTEM CHECKS (GASOLINE) in BASIC DIAGNOSTIC PROCEDURES - TRUCKS - EXCEPT TRACKER article.
  4. 6

    If pressure drop value for each fuel injector is within 1.5 psi (10 kPa) of average pressure drop value, fuel injectors are flowing properly. Calculate pressure drop value for each fuel injector by subtracting second pressure reading from first pressure reading. See Figure.