Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Remove the right rear seat cushion. Refer to Seat Cushion Replacement - Rear No. 1 (TrailBlazer, Envoy, Bravada) in Seats.
Remove the communication interface module. Refer to Communication Interface Module Replacement (TrailBlazer, Envoy, Bravada) or Communication Interface Module Replacement (TrailBlazer EXT, Envoy XL) in Interior Trim.

Fig 1: Releasing Retaining Tab On Upper Bracket

Courtesy of GENERAL MOTORS CORP.

Using a flat bladed tool, release the retaining tab on the upper bracket.
Slide the upper bracket inboard until the retaining tabs are released from the processor bracket.
Remove the upper bracket from the processor bracket.

Fig 2: Removing Processor Bracket

Courtesy of GENERAL MOTORS CORP.

Remove the nut that retains the processor bracket to the rear seat back stud.
Remove the processor bracket from the vehicle.