LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 372 (Engine Control System - Self-Diagnostics - 4.2L) >> Programming >> Theft Deterrent Learn Procedure >> 10-Minute Learn Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

10-Minute Learn Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Tools required are Tech 2™ scan tool and Techline® terminal with current Service Programming System (SPS) software.
  1. Connect the Tech 2™ to vehicle.
  2. Select "Request Information" under "Service Programming".
  3. Disconnect the Tech 2™ from vehicle and connect it to a Techline® terminal.
  4. On the Techline™ terminal, select "Theft Module Re-Learn" under "Service Programming".
  5. Disconnect the Tech 2™ from the Techline™ terminal and connect it to the vehicle.
  6. Turn ignition on, with engine off.
  7. Select "VTD Re-Learn" under "Service Programming".
  8. Attempt to start engine, then release the key to ON (vehicle will not start).
  9. Observe the SECURITY telltale, after about 10 minutes the telltale will turn OFF (the vehicle is now ready to relearn the Passlock™ Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK).
  10. Turn ignition off, and wait 5 seconds.
  11. Start engine (vehicle has now learned the password).
  12. With Tech 2™ scan tool, clear any DTCs.
scientia non olet · About LEMON Manuals