LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2002 >> Jimmy 4D Utility, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 945 (Anti-Lock Brake System) >> Description and Operation >> ABS Description and Operation >> Programming the Traction Control Automatic Engagement Feature
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming the Traction Control Automatic Engagement Feature

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

The automatic engagement feature may be programmed so that the traction control system activates or does not activate automatically at the start of each ignition cycle. In order to change the status of the automatic engagement feature, perform the following procedure:

IMPORTANT: Failure to follow the correct procedure may cause DTC C0283 to set in EBCM memory.
  1. Park the vehicle with the ignition OFF and the transmission in PARK (P).
  2. Turn the ignition ON, engine OFF.
  3. Press and hold the brake pedal and the accelerator pedal.
  4. Press and hold the traction assist switch for 5 seconds.
  5. Release the brake and accelerator pedals and the traction control switch.
  6. Turn the ignition OFF.
scientia non olet · About LEMON Manuals