Scan Tool Data List Definitions: 2.2L

The column labeled Data List indicates where a parameter is located on the scan tool. Review the scan tool operating manual for the exact locations of the data lists. The following is a description of each term listed.

1. Engine Data 1
   
   Contains general informations regarding fuel delivery and basic engine operating conditions.
2. Engine Data 2
   
   Contains general information regarding A/C, Crankshaft Position (CKP), Camshaft Position (CMP), Knock Sensor (KS), and basic engine operating conditions.
3. Engine Data 3
   
   Contains general information regarding fuel delivery, Engine Coolant Temperature (ECT), Intake Air Temperature (IAT), Vehicle Theft Deterrent (VTD), and basic engine operating conditions.
4. Evaporative Emission (EVAP) Data
   
   Contains information specific to the EVAP control system. Also displays parameters required to verify proper EVAP system operation.
5. Fuel Trim Data
   
   Contains specific information regarding fuel trim.
6. Misfire Data
   
   Contains specific information regarding misfire diagnostics and parameters required to verify proper operation with regard to misfire.