Scan Tool Data List Definitions: 4.3L

The column labeled Data List indicates where a parameter is located on the scan tool. Review the scan tool operating manual for the exact locations of the data lists. The following is a description of each term listed.

1. All
   
   The parameter is in all of the data lists indicated below.
2. Eng 1
   
   Engine Data 1 list.
3. Eng 2
   
   Engine Data 2 list.
4. EE
   
   Enhanced EVAP Data
5. FF/FR
   
   Freeze Frame/Failure Records
6. FT
   
   Fuel Trim Data List
7. MF
   
   Misfire Data List