Method 2-Scan Tool Required, Program Individual Transmitter

Only use this option if you are certain which transmitter #1-#4 is being replaced, or the new transmitter can be programmed into a previously unused position within the PDM memory. Refer to IMPORTANT above.

1. Install a scan tool.
2. Turn the ignition ON, with the engine OFF.
3. Use the scan tool in order to access the passenger door module Special Function menu.
4. Select "Program Individual Key Fob" to program a specific transmitters.
5. Follow the directions on the scan tool in order to program the transmitter or transmitters.
6. Operate the transmitter functions in order to verify correct system operation.