LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2004 >> Jimmy 2D Utility, Automatic, Standard >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Wheel Control Switch Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    CAUTION: Refer toSIR Caution in Cautions and Notices.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
  2. Remove the inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  3. Fig 1: Locating Screws Retaining Horn Contact Plate To Steering Wheel
    GM1491622Courtesy of GENERAL MOTORS CORP.
  4. Remove the screws (1) which retain the horn contact plate to the steering wheel.
  5. Fig 2: Locating Screws Retaining Control Button Assembly To Steering Wheel
    GM1491626Courtesy of GENERAL MOTORS CORP.
  6. Remove the two screws (1) which retain the control button assembly (2) to the steering wheel.
  7. Fig 3: Locating Electrical Connector
    GM1491628Courtesy of GENERAL MOTORS CORP.
  8. Disconnect the electrical connector (2) from the control button assembly (1).