October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Remove the caps from the fuel and evaporative emission (EVAP) pipes.
- Connect the rear fuel return pipe to the chassis fuel return pipe (2).
- Connect the rear fuel feed pipe to the fuel filter inlet.
- Install the fuel feed and return pipes into the retainers.
- Install the fuel tank. Refer to Fuel Tank Replacement (2-Door Utility) or Fuel Tank Replacement (4-Door Utility) .
- Lower the vehicle.
- Refill the fuel tank.
- Tighten the fuel filler cap.
- Connect the negative battery cable.
- Inspect for leaks.
- Turn ON the ignition for 2 seconds.
- Turn OFF the ignition for 10 seconds.
- Turn ON the ignition.
- Inspect for fuel leaks.