Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment
WARNING: This page is about a different car, the 2013 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the steering linkage inner tie rod nut (1) on the outer tie rod.
- Rotate the inner tie rod to the required toe specification setting. Refer to Wheel Alignment Specifications .
- Tighten the steering linkage inner tie rod nut. Refer to Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment .
- Check the toe setting after tightening. Refer to Wheel Alignment Specifications .
- Re-adjust the toe setting if necessary.
CAUTION:
Care must be taken that the boots are not twisted when rotating the inner tie rods, or damage to the boots may result.