LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> GMC >> 2007 >> Acadia SLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 179 (Lighting Systems) >> Diagnostic Information and Procedures >> DTC B257A >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the C1 and C2 harness connectors at the BCM.
  2. Connect a test lamp between the headlamp switch OFF signal circuit and B+.
  3. Turn the headlamp switch to the ON and OFF positions. The test lamp should turn ON and OFF as the switch is cycled.
    • If the test lamp is always OFF, test the signal circuit for a short to voltage or an open/high resistance. If the circuit test normal, replace the turn signal/multifunction switch.
    • If the test lamp is always ON, test the signal circuit for a short to ground. If the circuit test normal, replace the turn signal/multifunction switch.
  4. Connect a test lamp between the headlamp switch headlamps ON signal circuit and B+.
  5. Turn the headlamp switch to the ON and OFF positions. The test lamp should turn ON and OFF as the switch is cycled.
    • If the test lamp is always OFF, test the signal circuit for a short to voltage or an open/high resistance. If the circuit test normal, replace the turn signal/multifunction switch.
    • If the test lamp is always ON, test the signal circuit for a short to ground. If the circuit test normal, replace the turn signal/multifunction switch.
  6. Connect a test lamp between the park lamp switch ON signal circuit and B+.
  7. Turn the headlamp switch to the PARK and OFF positions. The test lamp should turn ON and OFF as the switch is cycled.
    • If the test lamp is always OFF, test the signal circuit for a short to voltage or an open/high resistance. If the circuit test normal, replace the turn signal/multifunction switch.
    • If the test lamp is always ON, test the signal circuit for a short to ground. If the circuit test normal, replace the turn signal/multifunction switch.
  8. If all circuits test normal, replace the BCM.
scientia non olet · About LEMON Manuals