Circuit/System Verification
WARNING: This page is about a different car, the 2009 Saturn Outlook, 2009 GMC Acadia, 2009 Chevrolet Traverse, and 2009 Buick Enclave. However, it is still accessible from the selected car via links, so may be relevant.
- Program the VIN information to the module that set the DTC.
- Turn the ignition OFF, wait several seconds and then turn the ignition ON.
- Retrieve DTCs from the module that set the DTC. DTC B1016 should change to a history DTC.
- If this DTC is retrieved as a current DTC, replace the module that set the DTC.